How to spray paint a wire shelf
Ready to accent your walls with an eye-catching accessory? With a unique 5-in-1 nozzle, Switch is the ideal spray paint to revamp furniture and décor with the perfect finish. Read on to find out how to revamp a wire shelf in just a few simple steps.
Steps
Clean your wire shelf with Krud Kutter in order to remove any dust or dirt, rinse thoroughly with water and allow to dry. You may also want to put down a dust sheet to protect your floor.
Shake the can vigorously for one minute and set the Switch dial to number 3, selecting Low Output. The Low Output sprays a lower volume of paint for more control, making it perfect for the crosshatch pattern on this wire shelf. It’s also great for door knockers, letterboxes and detailed nooks and crannies.
Now you’re ready to start spraying! To achieve a smooth finish, hold the can roughly 30cm away from the surface. Spray each section following the direction of the shelf, in a steady back and forth motion, while slightly overlapping each stroke. If spraying bare metal or plastic shelves, make sure to use a suitable primer first.
Top tip: after use, turn the can upside down and spray for 2-3 seconds to clear the spray nozzle, so it’s ready for your next project. Repeat this step for each nozzle used by rotating the dial.
And that’s it! Touch dry in 15 minutes and hard dry in 4 hours, stand back to admire your stunning new shelf. We chose the shade Misty Blue and styled with a potted plant, bringing some much-needed personality to this office.
Whether you want to update an old piece of furniture, or put your own stamp on uninspired décor, Switch is perfect for your next upcycling project. Simply select the spray output to suit the job and choose from 22 stunning colours. Available in matt, satin and gloss finishes.
Feeling inspired to switch up your spaces? Check out or other handy how to guides here.
