Steps

1. 

   Remove any loose or flaking paint by thoroughly scraping or sanding your planter. You may also want to put down a dust sheet to protect your patio. Clean the planter with Krud Kutter in order to remove any dirt, grime or other contaminants. Rinse thoroughly and allow to dry.   

2. 

   Shake the can vigorously for one minute and set the Switch dial to number 1, selecting High Output. The High Output releases a higher volume of paint, making it great for larger projects like planters, shelving and garden chairs.  

   Now you’re ready to start spraying! To achieve a smooth finish, hold the can roughly 30cm away from the surface. Spray the planter horizontally, in a steady back and forth motion, while slightly overlapping each stroke. Apply a second coat within an hour if necessary.   

   Top tip: after use, turn the can upside down and spray for 2-3 seconds to clear the spray nozzle, so it’s ready for your next project. Repeat this step for each nozzle used by rotating the dial.  

3. 

   And that’s it! Touch dry in 15 minutes and hard dry in 4 hours, stand back to admire your new revamped planter. We went for soothing Vintage Green to perfectly match the natural earth tones found in gardens.  

   Whether you’re painting large pieces of furniture or smaller accessories, there’s a spray nozzle to suit your project. With 22 stunning shades and matt, satin and gloss finishes to choose from, Switch is a simple, effective way of upcycling décor.    

   Feeling inspired to switch up your spaces? Check out or other handy how to guides here.